SolarPath Sun Solutions engineers complete off-grid lighting systems that deliver consistent lumen output across every season. Each fixture pairs a high-efficiency photovoltaic (PV) panel with a lithium iron phosphate (LiFePO4) battery and an MPPT charge controller, providing three to five days of autonomy on a single charge. Every product carries an IP65 or IP67 ingress protection rating, configurable color temperature (CCT) from 3000K to 5700K, and a color rendering index (CRI) above 70.
Our catalog spans fourteen product families built for commercial, municipal, and institutional sites nationwide. Every fixture ships DLC listed and UL listed, ready for code compliance and utility rebate programs in all fifty states.
All-in-one fixtures integrate the PV panel, LiFePO4 battery, MPPT controller, and LED array into a single housing. This single-unit design cuts installation time, eliminates trenching, and reduces the bill of materials. SolarPath all-in-one lights deliver 3000 to 6000 lumens, carry IP65 ingress protection, and provide three days of autonomy through overcast conditions.
All-in-two fixtures separate the PV panel from the LED head, giving site engineers flexibility to tilt the panel toward optimal solar irradiance while aiming the light where the project needs it. This configuration suits tall poles, shaded roadways, and sites with variable peak sun hours (PSH). Expect 5000 to 12000 lumens, IP66 ratings, and four-day autonomy across most climates.
Our full catalog spans cobra-head street lights, flood lights, wall packs, bollards, canopy fixtures, monument lights, security lights, construction lights, charging poles, decorative LEDs, and traffic lights. Every product line runs on the same LiFePO4 and MPPT platform, so a mixed-fixture specification retains parts compatibility, warranty terms, and a single point of accountability.
Category | Description | Key Features |
All-In-One Lights | Single-housing street and area lights | 3000–6000 lumens, IP65, three-day autonomy |
All-In-Two Lights | Split-panel street lights for tall poles | 5000–12000 lumens, IP66, four-day autonomy |
Bollards | Low-level pathway and perimeter lighting | 400–1200 lumens, IP65, dark-sky compliant |
Flood & Wall Pack | Security and facade lighting | 2000–8000 lumens, IP66, motion-sensor options |
Specialty & Decorative | Monument, canopy, traffic, charging pole | Custom CCT and CRI, dark-sky shielding |
Commercial solar lighting demands more than a panel and a battery. Site conditions change hour by hour, code requirements vary state by state, and rebate programs require DLC listing and verified photometrics. SolarPath engineers every product against these realities.
From photometric design through commissioning, our team aligns fixture selection with each site’s peak sun hours, pole height, target lux level, and autonomy requirement. The result is a system that performs in year one and still performs in year ten.
Every fixture carries DLC and UL listings, a five-year warranty, and an MTBF rating above 50,000 hours. Our LiFePO4 batteries deliver 3,000+ deep-cycle charges before capacity degradation.
Operating temperature from -40 degrees F to 140 degrees F. IP65 and IP67 ratings on every fixture. Autonomy days configurable from three to seven based on climate zone and peak sun hours.
Every SolarPath product ships DLC listed and UL listed, meeting federal, state, and municipal procurement standards. Listings unlock rebates, tax credits, and dark-sky ordinance compliance.
Every SolarPath product family below supports commercial, municipal, and institutional deployments. Select any category to view specifications, photometrics, and spec sheets.
Cobra-head and all-in-one street lights for roadways, collectors, and local streets. 3000 to 12000 lumens.
Integrated PV panel, LiFePO4 battery, MPPT controller, and LED head in one housing. Fast install, no trenching.
Split-panel configuration for tall poles and sites with variable peak sun hours or heavy tree cover.
Low-level pathway lighting with dark-sky shielding, 3000K warm CCT, and IP65 ingress protection.
Security lighting for perimeters, facades, and storage yards. Motion-sensor compatible at 2000 to 8000 lumens.
Monument, canopy, traffic, charging pole, and custom-CCT decorative LED fixtures for civic and campus sites.
Every SolarPath fixture meets DLC and UL standards, unlocking rebate eligibility and code compliance nationwide.
Lithium iron phosphate chemistry delivers 3,000+ deep-cycle charges, -40 degrees F operation, and zero thermal runaway risk.
Maximum power point tracking converts up to 30 percent more solar energy than PWM controllers in low-light conditions.
Standard five-year warranty on every product covers panel, battery, controller, and LED array. Extended terms available.
With engineered off-grid solutions deployed across commercial, municipal, and institutional sites nationwide, SolarPath Sun Solutions is the trusted choice for project managers, facility directors, and procurement teams. We pair each specification with a photometric study, an autonomy calculation, and a commissioning report so the system performance is verified before shipment.
Our fixtures run on DLC-listed and UL-listed hardware, meet dark-sky (IDA) ordinances where applicable, and carry a five-year warranty covering the photovoltaic panel, LiFePO4 battery, MPPT controller, and LED array. One warranty. One point of contact. One accountable partner.
Every SolarPath fixture is rated IP65 at minimum, with bollards, flood lights, and street lights at IP66 or IP67. These ratings confirm the fixture resists dust ingress and high-pressure water, which meets the demands of coastal, industrial, and municipal sites.
Lithium iron phosphate (LiFePO4) chemistry delivers 3,000 to 5,000 deep-cycle charges before capacity degradation, compared to 500 to 1,000 cycles for standard lithium-ion. LiFePO4 also operates safely from -40 degrees F to 140 degrees F without thermal runaway risk, which matters for outdoor deployments.
Autonomy days refer to the number of nights a fixture operates without any solar recharge. SolarPath recommends three days for Sun Belt sites with peak sun hours (PSH) above 5.5, four days for temperate zones with 4.5 to 5.5 PSH, and five to seven days for northern climates or sites with heavy tree cover.
DLC (DesignLights Consortium) listing certifies that a fixture meets commercial-grade performance standards for efficacy, distribution, and longevity. DLC-listed products qualify for utility rebate programs in most states and fulfill most federal, state, and municipal procurement requirements.
Maximum power point tracking (MPPT) is a charge controller algorithm that continuously adjusts the electrical load on the photovoltaic panel to extract the highest available power. MPPT recovers up to 30 percent more energy than PWM controllers in cloudy, dawn, and dusk conditions, which directly improves autonomy.
Color temperature (CCT) is configurable at 3000K (warm white), 4000K (neutral), and 5700K (daylight). Color rendering index (CRI) runs at 70 minimum, with 80+ options available for pedestrian and retail environments. 3000K CCT is typically required on IDA dark-sky compliant sites.
Every SolarPath product ships with a standard five-year warranty covering the photovoltaic panel, LiFePO4 battery, MPPT charge controller, and LED array. Extended seven-year and ten-year warranty options are available for municipal and federal contracts.
Request a free solar lighting audit and discover how off-grid commercial lighting can reduce your operating costs to zero.
Or call 1-800-SOLAR-PATH
