Commercial security and perimeter lighting requires motion-activated illumination, surveillance camera compatibility, and continuous nighttime operation across industrial perimeters, storage yards, municipal facilities, utility substations, and retail back-of-house environments. Traditional grid-tied security lighting runs at full output all night—drawing unnecessary kWh during low-activity hours and accumulating significant operating cost.
SolarPath security and perimeter solar lighting combines the autonomy of commercial solar fixtures with PIR motion detection and two-stage dimming profiles. The fixture holds a 20 percent ambient output through low-activity hours and delivers a 2,000 to 8,000 lumen burst when motion is detected in the sensor zone. This duty cycle doubles effective autonomy compared to steady-state security lighting while providing the bright burst that surveillance camera image quality requires.
Browse our solar security lights, flood lights, and wall packs for perimeter applications.
Solar security lights with PIR motion sensors and two-stage dimming are the flagship specification for perimeter projects. 15 to 40 foot detection range, configurable ambient output, and burst duration of 30 to 300 seconds.
Solar flood lights cover large-area security applications like storage yards and industrial perimeters. Solar wall packs mount directly on building exteriors for loading docks, service entrances, and facade illumination.
Explore our full product catalog to match fixtures to perimeter length, detection zones, and surveillance integration requirements.
A logistics company needed to light 2,400 linear feet of storage yard perimeter and 6 loading dock bays for 24/7 security operations. Existing high-pressure sodium perimeter lights drew 360 kWh per night running at steady state. The facility manager wanted motion-activated dimming but lacked budget for a full grid-tied controls retrofit.
SolarPath solar security lights at 20-foot pole heights with PIR motion sensors delivered 6,000 lumens on detection and 1,200 lumens ambient. Installation completed in 7 crew days across the full perimeter. Night-time energy draw dropped from 360 kWh (grid-tied) to zero (solar), and the two-stage dimming provided 4x the effective autonomy of steady-state operation. All 18 fixtures integrate with existing surveillance cameras, and the five-year warranty covers every component.
Security and perimeter lighting prioritize motion response, surveillance integration, and vandalism resistance. SolarPath fixtures for this application ship with PIR motion sensors, reinforced mounting, and configurable duty cycles tuned to site traffic patterns at commissioning.
Every project ships with a stamped photometric study confirming lux targets, uniformity ratios, and fixture placement before procurement.
3000K and 4000K CCT with full-cutoff optics meet International Dark-Sky Association ordinances and county regulations.
Standard coverage on the photovoltaic panel, LiFePO4 battery, MPPT charge controller, and LED array across every SolarPath fixture.
Motion-activated security lighting cuts operating cost by running at reduced ambient levels through low-activity hours. Two-stage dimming extends effective autonomy and matches the exact duty cycle that perimeter security deployments actually require. Off-grid operation avoids the trenching and conduit that traditional perimeter security lighting demands, and the sealed LiFePO4 battery compartments resist vandalism and weather exposure that commonly degrade grid-tied fixtures.
improvement in effective autonomy from two-stage PIR dimming versus steady-state perimeter lighting operation.
typical detection events per night on commercial perimeter security sites, which most PIR duty cycles handle without impacting overall autonomy reserves.
years of LiFePO4 service life on typical security lighting duty cycles, outperforming sealed lead-acid alternatives significantly.
Specification | Value |
Lumen Output (Burst) | 2,000 to 8,000 lm |
Lumen Output (Ambient) | 20 percent of burst level |
PIR Detection Range | 15 to 40 ft configurable |
Burst Duration | 30 to 300 seconds configurable |
Recommended Fixture | Solar Security Light + Flood + Wall Pack |
CCT | 4000K / 5700K selectable |
Pole Height | 10 to 25 ft |
Surveillance Integration | Compatible with standard camera CCT |
Autonomy | 4 to 5 nights typical duty cycle |
Warranty | 5 years standard |
Every fixture generates its own power. No utility meter, no demand charges, no rate escalation over the fixture lifetime.
Off-grid fixtures eliminate underground conduit, electrical permits, and utility service drops. Install in days instead of weeks.
Pole, base plate, and fixture finish in a single crew day per unit. No utility coordination, no closure of active areas during daylight.
3,000+ deep-cycle charges, operation from -40 F to 140 F, and 10+ year service life across every SolarPath fixture.
From industrial storage yards to municipal facilities, utility substations, and retail back-of-house perimeters, SolarPath Sun Solutions delivers security lighting engineered for motion-activated duty cycles and surveillance camera integration. Every project ships with a photometric study, a PIR sensor configuration plan, and a five-year warranty on every fixture.
Browse our solar security lights and full product catalog.
A passive infrared sensor detects temperature changes caused by motion in a configurable 15 to 40 foot zone. On detection, the LED ramps from 20 percent ambient to full burst output in under one second, holds for the configured duration, then ramps back down. Sensor sensitivity and zone are tunable at commissioning.
Yes. The burst output triggers at the same detection point as most outdoor surveillance cameras, providing the bright illumination needed for clear image capture. SolarPath CCT options (4000K and 5700K) match standard camera white balance.
Typical security sites see 8 to 12 detection events per night each lasting under 90 seconds. The remainder of the night runs at 20 percent ambient output. This profile doubles to quadruples effective autonomy compared to steady-state full output.
15 to 20 feet for close-range perimeter coverage. 20 to 25 feet for wide perimeter and storage yard coverage. Higher pole heights deliver wider PIR detection zones and longer light throw distances.
Yes. Reinforced mounting hardware, sealed LiFePO4 battery compartments, and pole-mounted fixtures above reach height resist common vandalism. Marine-grade hardware options are available for high-risk sites.
5700K daylight is the most common choice because it maximizes perceived brightness and pairs with surveillance camera white balance. 4000K neutral is available for sites with residential or hospitality exposure.
Yes. Every SolarPath security light ships DLC and UL listed, qualifying for utility rebate programs and meeting federal, state, and municipal procurement contract specifications.
Request a free solar lighting audit and discover how off-grid commercial lighting can reduce your operating costs to zero.
Or call 1-800-SOLAR-PATH
