Active construction sites need portable high-output illumination for evening and overnight work phases, material staging, safety zones, and temporary storage areas. Traditional construction lighting relies on diesel generator towers that require fuel delivery, ongoing maintenance, emissions compliance, and substantial noise. Rural and remote construction sites face fuel supply chain challenges that add cost and scheduling complexity.
SolarPath construction site solar lighting replaces diesel tower lighting with zero-fuel, zero-emission, zero-noise rapid-deploy fixtures. Each unit delivers 4,000 to 10,000 lumens with 5 to 7 days of autonomy, trailer-mount or skid-mount configurations, and two-person crew deployment in under 30 minutes per unit. DLC and UL listings meet FEMA and state DOT emergency response procurement requirements.
Browse our solar construction lights, flood lights, and full product catalog.
Solar construction lights are the purpose-built specification for portable job site illumination. Trailer-mount configurations relocate between project phases, 15 to 25 foot telescoping towers, and 5 to 7 day autonomy cover multi-day project work without any fuel delivery.
Solar flood lights handle fixed-position lighting on longer-term construction sites where portable relocation is not required. Solar security lights with PIR sensors cover overnight perimeter and material storage protection.
Explore our full product catalog for rapid-deploy construction lighting solutions.
A state DOT general contractor needed portable lighting for a highway reconstruction project covering 2.8 miles of work zone with active construction phases running 12 hours per day across 6 months. Traditional diesel tower rentals would have cost $18,000 per month in equipment plus $6,400 per month in fuel delivery, and generator noise complaints from nearby residents had already delayed two projects in the prior year.
SolarPath solar construction lights replaced 12 diesel towers at the work zone. Two-person crews deployed each unit in under 25 minutes. Five-day autonomy covered consecutive overcast days in spring weather. Monthly operating cost dropped from $24,400 to zero, and adjacent residential complaints ended with the quiet off-grid operation. The project completed on schedule with the five-year warranty covering every fixture for follow-on projects.
Construction site lighting prioritizes portability, rapid deployment, and zero-fuel operation. SolarPath construction fixtures fold for transport, deploy in under 30 minutes, and relocate between project phases without reinstallation or crane support. Every unit replaces a diesel generator tower on the same project budget.
Every project ships with a stamped photometric study confirming lux targets, uniformity ratios, and fixture placement before procurement.
3000K and 4000K CCT with full-cutoff optics meet International Dark-Sky Association ordinances and county regulations.
Standard coverage on the photovoltaic panel, LiFePO4 battery, MPPT charge controller, and LED array across every SolarPath fixture.
Solar construction lighting eliminates diesel fuel delivery, generator maintenance dispatch, emissions compliance reporting, and noise complaints from residential neighbors. Rapid deployment lets project managers respond to changing site phasing without coordinating fuel supply chains. Rural and remote construction sites that would face fuel logistics challenges on diesel rental equipment operate reliably on SolarPath solar fixtures without any delivery coordination.
typical monthly savings per fixture when solar construction lighting replaces diesel generator tower rentals on active projects.
minute deployment time for a two-person crew to erect a complete SolarPath construction lighting unit from trailer to fully operational.
days of continuous operation on a full charge across typical construction site duty cycles, covering extended overcast weather.
Specification | Value |
Lumen Output | 4,000 to 10,000 lm |
Tower Height | 15 to 25 ft (extended) |
Chassis | Trailer-mount, skid-mount, or pole-mount |
Deployment Time | Under 30 minutes (two-person crew) |
Relocation | Tows between project phases |
Autonomy | 5 to 7 nights continuous operation |
Transport Size | Under 12 ft folded |
Recommended Fixture | Solar Construction Light (portable) |
Fuel Required | None (zero emissions, zero noise) |
Warranty | 5 years standard |
Every fixture generates its own power. No utility meter, no demand charges, no rate escalation over the fixture lifetime.
Off-grid fixtures eliminate underground conduit, electrical permits, and utility service drops. Install in days instead of weeks.
Pole, base plate, and fixture finish in a single crew day per unit. No utility coordination, no closure of active areas during daylight.
3,000+ deep-cycle charges, operation from -40 F to 140 F, and 10+ year service life across every SolarPath fixture.
From highway reconstruction to commercial building projects, utility work zones, and disaster recovery operations, SolarPath Sun Solutions delivers construction lighting engineered for rapid deployment and zero-fuel operation. Every unit replaces a diesel tower on the same budget while eliminating fuel logistics, emissions, and noise.
Browse our solar construction lights and full product catalog.
Under 30 minutes per unit with a two-person crew. The tower erects, the PV panel array unfolds, and the LED head aims in a single continuous operation. No utility hookup, no fuel delivery, no generator startup.
Yes. SolarPath construction lights deliver comparable lumen output (4,000 to 10,000 lm) without fuel consumption, emissions, noise, or generator maintenance. State DOT contractors and disaster recovery operations have adopted solar as the primary portable lighting specification.
Five to seven nights of continuous operation on a full charge. The LiFePO4 battery capacity supports multi-day project phases without solar recharge, and normal daily operation restores capacity during daylight hours.
Yes. Trailer-mount configurations tow to the next site without disassembly. The pole folds, the panel array secures, and the unit moves as a single trailer load. Skid-mount variants require a forklift for relocation.
Fixed-height configurations at 15, 20, and 25 feet. Telescoping variants extend from 12 to 25 feet for applications where tower height varies by site. Higher mounting delivers wider work area coverage per unit.
DLC and UL listings meet FEMA and state emergency management procurement requirements. Multiple state agencies maintain active contracts for SolarPath construction lights as part of their emergency response equipment inventory.
Under 12 feet long folded, under 7 feet wide, and under 8 feet tall on the trailer. The unit fits standard half-ton truck towing without CDL operation or oversize permits.
Request a free solar lighting audit and discover how off-grid commercial lighting can reduce your operating costs to zero.
Or call 1-800-SOLAR-PATH
