Client logos coming soon.
Georgia averages 4.7 to 5.2 peak sun hours (PSH) per day, with South Georgia trending higher and the North Georgia mountains trending lower. Annual solar irradiance reaches 1,600 kWh per square meter across most of the state. SolarPath Sun Solutions deploys commercial solar lighting across Georgia interstate corridors, Atlanta metro parking lots, rural county roads, and forestry management sites where the mature Southeast solar supply chain meets strong municipal procurement demand.
Every fixture ships DLC listed and UL listed, pairs a lithium iron phosphate (LiFePO4) battery with an MPPT charge controller, and carries an IP65 or IP66 ingress protection rating. Georgia Power operates several utility-level incentive programs that support commercial lighting retrofits. Department of Energy reporting ranks Georgia among the top eight US states for cumulative solar installed capacity.
SolarPath Sun Solutions deploys commercial solar lighting across Solar Lighting Solutions in Georgia with a single-source platform for products, photometric design, and installation. Every project runs on DLC-listed and UL-listed hardware, pairs a lithium iron phosphate (LiFePO4) battery with an MPPT charge controller, and delivers three to seven days of autonomy based on the site’s peak sun hours (PSH). Browse our product families and application categories below to match the right fixture to your Solar Lighting Solutions in Georgia project.
Solar Street and Area Lights form the core of most commercial SolarPath deployments in Solar Lighting Solutions in Georgia. Our all-in-one and all-in-two fixtures deliver 3000 to 12000 lumens with Type II and Type III photometric distribution, 3000K or 4000K CCT, and four-day autonomy on a single charge. Every fixture ships with an IP65 or IP66 ingress protection rating and a five-year warranty covering the photovoltaic panel, LiFePO4 battery, MPPT controller, and LED array.
Parking Lot and Roadway Lighting targets 1 to 3 footcandles average maintained at uniformity ratios below 4:1. Solar Lighting Solutions in Georgia projects typically use all-in-two fixtures at 20 to 30 foot pole heights, eliminating trenching, conduit, and utility hookup. Roadway applications meet IES RP-8 standards with Type II and Type III distribution tuned to the corridor geometry.
Park, Pathway, and Bollard Lighting combines dark-sky compliance with pedestrian-scale illumination. SolarPath bollards and decorative LEDs deliver 400 to 1200 lumens with full-cutoff optics, 3000K warm CCT, and CRI 80+ for color-accurate wayfinding on Solar Lighting Solutions in Georgia civic and campus sites. Every fixture meets International Dark-Sky Association (IDA) ordinances.
Security and Perimeter Lighting protects Solar Lighting Solutions in Georgia storage yards, industrial sites, and municipal facilities with motion-triggered flood lights and wall packs. PIR sensors, two-stage dimming, and 4000 to 8000 lumen bursts extend autonomy during low-activity hours while delivering instant full output when movement is detected.
Sports Field and Recreation Lighting handles Solar Lighting Solutions in Georgia athletic facilities, school playfields, and community recreation sites. High-output all-in-two fixtures deliver 10000 to 20000 lumens per head, pair with pole heights of 30 to 50 feet, and run on scheduled timers that match league and practice hours.
Specialty and Decorative Lighting covers Solar Lighting Solutions in Georgia monument lighting, canopy fixtures, traffic signals, solar charging poles, and custom-CCT decorative LEDs. Every specialty product runs on the same LiFePO4 and MPPT platform as our standard catalog, so project managers retain one warranty, one point of contact, and one accountable partner across mixed-fixture specifications.
Georgia’s combination of moderate PSH, mature solar supply chain, and aggressive municipal procurement makes the state one of the most active commercial solar lighting markets in the Southeast. Atlanta metro parking lots, school district retrofits, and county road projects frequently specify DLC-listed off-grid fixtures to avoid the trenching cost and coordination overhead of grid-tied lighting.
Humidity and thunderstorm cycles shape enclosure specifications. Georgia sees 50+ thunderstorm days per year in the central and southern regions, and summer humidity routinely exceeds 85 percent. SolarPath fixtures use IP66 enclosures with pressure-equalized membrane venting to manage humidity without compromising ingress protection, and the LiFePO4 battery compartment is sealed against both moisture and pest intrusion.
Georgia forestry management and rural county projects benefit from the zero-trenching economics of solar lighting. Remote fire lookout stations, wildlife management area gates, and forestry access roads avoid miles of conduit that would otherwise run through environmentally sensitive timber stands. Our security applications and all-in-two fixture family cover these deployment types.
SolarPath Sun Solutions ships and supports commercial solar lighting projects across 12 states. Our engineering and logistics teams handle every deployment from coastal Florida to the Colorado Rockies, with region-specific peak sun hours modeling and compliance support baked into every quote.
SolarPath commercial solar lighting deployments across California — from Los Angeles parking facilities to Bay Area municipal projects. Our California team coordinates DLC and UL listed equipment with CEC-compliant installations.
Texas commercial solar lighting projects spanning Houston, Dallas, Austin, and San Antonio. High peak sun hours make Texas ideal for off-grid parking lot, roadway, and industrial site deployments.
Florida solar lighting installations engineered for Category-5 wind loads and salt-air environments. Miami-Dade NOA certified mounting for hurricane-zone parking, pathway, and municipal lighting projects.
New York commercial solar lighting serving NYC boroughs, Long Island, and upstate municipalities. LiFePO4 battery systems sized for northern-latitude winter autonomy and DEC dark-sky compliance.
Mature Georgia solar industry, local installer network, and streamlined municipal procurement support fast project delivery.
IP66 ratings with pressure-equalized membrane venting handle Georgia summer humidity without compromising ingress protection.
Fixture platforms meet Georgia DOT specifications with stamped photometric studies for state and county corridor projects.
No-trenching installations keep fire lookouts, wildlife management areas, and forestry access roads free of environmental disturbance.
From Atlanta metro parking retrofits to South Georgia forestry access roads, SolarPath Sun Solutions matches Georgia projects with fixtures engineered for humidity, municipal procurement, and corridor lighting. Every specification ships with a photometric study, an autonomy calculation, and a commissioning report.
Our DLC-listed and UL-listed platform carries a five-year warranty. Browse our product catalog and roadway applications.
Georgia averages 4.7 to 5.2 PSH depending on region. South Georgia reaches 5.0 to 5.2, Central Georgia and the Atlanta metro average 4.8 to 5.0, and the North Georgia mountains trend closer to 4.5.
Fixture housings are IP66 rated with pressure-equalized membrane venting that manages humidity without compromising ingress protection. LiFePO4 batteries are sealed against moisture and pest intrusion, and surge protection on the MPPT controller handles thunderstorm-induced transients.
DLC-listed and UL-listed SolarPath fixtures may qualify under Georgia Power commercial lighting rebate programs. Documentation for rebate applications is provided on procurement.
Yes. Our fixture platforms meet Georgia Department of Transportation Standard Specifications Section 680 for highway lighting. We supply stamped photometric studies, pole loading calculations, and compliance documentation.
Yes. Fire lookout stations, wildlife management area gates, and forestry access roads are common Georgia deployment types. No-trenching installation keeps timber stands free of environmental disturbance during installation.
Georgia sites typically ship with four-day autonomy to cover summer thunderstorm cycles and winter shorter daylight hours. Coastal and South Georgia sites may ship with three-day autonomy on dry inland deployments.
SolarPath offers 3000K, 4000K, and 5700K selectable CCT. Atlanta metro retail lots typically specify 4000K, rural corridors use 3000K, and security projects often select 5700K for maximum perceived brightness.
Request a free solar lighting audit and discover how off-grid commercial lighting can reduce your operating costs to zero.
Or call 1-800-SOLAR-PATH
