Client logos coming soon.
Texas averages 4.5 to 5.5 peak sun hours (PSH) per day, with West Texas and the Permian Basin reaching 5.8 in summer. Annual solar irradiance stays above 1,750 kWh per square meter across most of the state. SolarPath Sun Solutions deploys commercial solar lighting on Texas parking lots, TxDOT corridors, ranch and farm roads, and oil-field access routes where trenching cost and utility distance make grid-tied lighting impractical.
Every fixture ships DLC listed and UL listed, pairs a lithium iron phosphate (LiFePO4) battery with an MPPT charge controller, and carries an IP65 or IP66 ingress protection rating. Texas operates its own grid through ERCOT and offers no state income tax, which simplifies project accounting for multi-site deployments. NREL solar resource data confirms Texas as the second-largest solar market in the US by installed capacity.
SolarPath Sun Solutions deploys commercial solar lighting across Solar Lighting Solutions in Texas with a single-source platform for products, photometric design, and installation. Every project runs on DLC-listed and UL-listed hardware, pairs a lithium iron phosphate (LiFePO4) battery with an MPPT charge controller, and delivers three to seven days of autonomy based on the site’s peak sun hours (PSH). Browse our product families and application categories below to match the right fixture to your Solar Lighting Solutions in Texas project.
Solar Street and Area Lights form the core of most commercial SolarPath deployments in Solar Lighting Solutions in Texas. Our all-in-one and all-in-two fixtures deliver 3000 to 12000 lumens with Type II and Type III photometric distribution, 3000K or 4000K CCT, and four-day autonomy on a single charge. Every fixture ships with an IP65 or IP66 ingress protection rating and a five-year warranty covering the photovoltaic panel, LiFePO4 battery, MPPT controller, and LED array.
Parking Lot and Roadway Lighting targets 1 to 3 footcandles average maintained at uniformity ratios below 4:1. Solar Lighting Solutions in Texas projects typically use all-in-two fixtures at 20 to 30 foot pole heights, eliminating trenching, conduit, and utility hookup. Roadway applications meet IES RP-8 standards with Type II and Type III distribution tuned to the corridor geometry.
Park, Pathway, and Bollard Lighting combines dark-sky compliance with pedestrian-scale illumination. SolarPath bollards and decorative LEDs deliver 400 to 1200 lumens with full-cutoff optics, 3000K warm CCT, and CRI 80+ for color-accurate wayfinding on Solar Lighting Solutions in Texas civic and campus sites. Every fixture meets International Dark-Sky Association (IDA) ordinances.
Security and Perimeter Lighting protects Solar Lighting Solutions in Texas storage yards, industrial sites, and municipal facilities with motion-triggered flood lights and wall packs. PIR sensors, two-stage dimming, and 4000 to 8000 lumen bursts extend autonomy during low-activity hours while delivering instant full output when movement is detected.
Sports Field and Recreation Lighting handles Solar Lighting Solutions in Texas athletic facilities, school playfields, and community recreation sites. High-output all-in-two fixtures deliver 10000 to 20000 lumens per head, pair with pole heights of 30 to 50 feet, and run on scheduled timers that match league and practice hours.
Specialty and Decorative Lighting covers Solar Lighting Solutions in Texas monument lighting, canopy fixtures, traffic signals, solar charging poles, and custom-CCT decorative LEDs. Every specialty product runs on the same LiFePO4 and MPPT platform as our standard catalog, so project managers retain one warranty, one point of contact, and one accountable partner across mixed-fixture specifications.
Texas combines strong solar resources, long rural distances, and permissive procurement rules that favor off-grid lighting. The cost of running utility service to a remote parking lot, ranch gate, or oil-field access road frequently exceeds the cost of a full SolarPath deployment in the first 18 months. Payback for sites that would otherwise require trenching typically lands inside three years.
Summer heat drives battery chemistry choices. Texas ambient temperatures routinely exceed 105 degrees F, and asphalt parking lot surface temperatures push above 140 degrees F. SolarPath LiFePO4 batteries operate from -40 degrees F to 140 degrees F with zero thermal runaway risk, which sealed lead-acid and standard lithium-ion chemistries cannot match for Texas conditions.
TxDOT Standard Specifications Item 610 covers roadway illumination, and SolarPath fixtures meet the required IES distribution types, pole loading classes, and photometric targets. Our roadway lighting applications include stamped photometric studies and TxDOT-compliant pole specifications on request. For oil-field and agricultural access roads, the all-in-two fixture family supports the tall pole heights and wide spacing typical of those corridors.
SolarPath Sun Solutions ships and supports commercial solar lighting projects across 12 states. Our engineering and logistics teams handle every deployment from coastal Florida to the Colorado Rockies, with region-specific peak sun hours modeling and compliance support baked into every quote.
SolarPath commercial solar lighting deployments across California — from Los Angeles parking facilities to Bay Area municipal projects. Our California team coordinates DLC and UL listed equipment with CEC-compliant installations.
Texas commercial solar lighting projects spanning Houston, Dallas, Austin, and San Antonio. High peak sun hours make Texas ideal for off-grid parking lot, roadway, and industrial site deployments.
Florida solar lighting installations engineered for Category-5 wind loads and salt-air environments. Miami-Dade NOA certified mounting for hurricane-zone parking, pathway, and municipal lighting projects.
New York commercial solar lighting serving NYC boroughs, Long Island, and upstate municipalities. LiFePO4 battery systems sized for northern-latitude winter autonomy and DEC dark-sky compliance.
Fixture platforms meet TxDOT Standard Specifications Item 610 with stamped photometric studies and compliant pole designs.
-40 degrees F to 140 degrees F operating range handles Texas summer heat and parking-lot surface temperatures above 130 degrees F.
Off-grid fixtures eliminate conduit, utility service drops, and ERCOT interconnection for remote ranch, farm, and oil-field sites.
Sites that would otherwise require trenched utility service typically pay back inside three years on avoided installation cost alone.
From Houston ship-channel perimeters to West Texas ranch roads, SolarPath Sun Solutions matches Texas projects with fixtures engineered for heat, distance, and code. Every specification ships with a photometric study, a LiFePO4 autonomy calculation, and a commissioning report completed by our field team.
Our DLC-listed and UL-listed platform carries a five-year warranty on every component. Browse our product catalog and parking lot applications.
Texas averages 4.5 to 5.5 PSH depending on region. West Texas and the Trans-Pecos reach 5.5 to 5.8, Central Texas stays around 5.0, and East Texas trends toward 4.5. SolarPath sizes every Texas system against the lower quartile of regional PSH.
Yes. Our fixture platforms meet TxDOT Standard Specifications Item 610 and applicable IES RP-8 distribution requirements. We supply stamped photometric studies, pole loading calculations, and compliance documentation on request.
LiFePO4 chemistry operates reliably up to 140 degrees F without capacity degradation or thermal runaway risk. Enclosures are ventilated and thermally managed so internal battery temperatures stay below the operating ceiling even during July and August surface temperatures.
Texas does not levy a state income tax, which simplifies project accounting. Texas offers a property tax exemption for renewable energy equipment under Texas Tax Code Section 11.27. Local property appraisers document the exemption on procurement.
Yes. Remote access roads, gate perimeters, and well-pad lighting are among our most common Texas deployments. Our all-in-two fixtures support tall pole heights and wide spacing, and the no-trenching installation avoids coordination with pipeline and underground utility records.
Our PV panels carry IEC 61215 hail impact certification for 25 mm ice balls at 23 m/s. Enclosures use aluminum and polycarbonate construction, and the installation manual includes replacement procedures for storm-damaged panels covered under the five-year warranty.
SolarPath offers selectable CCT at 3000K, 4000K, and 5700K. Urban and retail parking lots typically specify 4000K, rural roadways use 3000K for dark-sky compliance, and security lighting projects often select 5700K for maximum perceived brightness.
Request a free solar lighting audit and discover how off-grid commercial lighting can reduce your operating costs to zero.
Or call 1-800-SOLAR-PATH
