Canopy lighting applications—gas station fuel islands, parking deck structures, drive-through lanes, covered walkways, and retail entry canopies—present unique installation and photometric challenges. The fixture is physically shaded from direct sunlight by the canopy itself, which means roof-mounted or remote PV panels are required. Grid-tied canopy lighting retrofits require core-drilling through structural concrete for conduit, extended utility coordination, and fuel island closures that directly impact station revenue.
SolarPath canopy solar lighting integrates a low-profile under-canopy fixture with a separate roof-mounted photovoltaic (PV) panel connected by a short low-voltage cable along the canopy exterior. The lithium iron phosphate (LiFePO4) battery and MPPT charge controller are integrated into the fixture housing. Total fixture depth is under 3 inches to fit standard canopy clearance zones. Lumen output spans 3,000 to 8,000 lm with IP65 ingress protection and optional PIR motion sensors.
Browse our solar canopy lights, solar wall packs, and full product catalog.
Solar canopy lights are the purpose-built specification for under-canopy deployments. Low-profile housings (under 3 inches deep), roof-mounted PV panel with 10 to 25 foot cable runs, and integrated LiFePO4 battery in the fixture head.
Solar wall packs complement canopy projects on adjacent building exteriors, loading docks, and column-mounted perimeter positions. Solar flood lights handle larger canopy applications like parking deck open deck coverage and warehouse loading areas.
Explore our full catalog to match fixtures to canopy height, lux target, and mounting substrate.
A regional gas station operator needed to retrofit 12 fuel islands across 4 stations without closing any fuel island during daylight hours. Existing metal halide fixtures under the 14-foot canopies drew 4.8 kWh per fixture-night and required conduit runs through the concrete canopy deck that would have demanded 48 hours of closure per fuel island.
SolarPath canopy lights with 5,000 lumen LED arrays and roof-mounted 150W PV panels delivered 25 footcandles average maintained across every fuel island surface. Installation completed at 4 hours per fixture entirely during station closed hours, with no fuel island closure and no core drilling of the concrete canopy deck. Monthly energy cost dropped from $1,680 to zero across all 12 fixtures with a five-year warranty on every component.
Canopy lighting has unique installation, geometric, and photometric requirements. SolarPath canopy fixtures are purpose-engineered for under-canopy deployment with roof-mount PV, low-profile housings, and fast retrofit installation that avoids core drilling and fuel island closure.
Every project ships with a stamped photometric study confirming lux targets, uniformity ratios, and fixture placement before procurement.
3000K and 4000K CCT with full-cutoff optics meet International Dark-Sky Association ordinances and county regulations.
Standard coverage on the photovoltaic panel, LiFePO4 battery, MPPT charge controller, and LED array across every SolarPath fixture.
Show appreciation to top-tier customers through VIP access, previews, and immersive hospitality.
We document the activation and deliver professional assets and analytics for internal and external use.
Specification | Value |
Target Footcandles | 20 to 30 fc (gas station); 5 to 15 fc (parking deck) |
Fixture Depth | Under 3 inches from canopy underside |
Lumen Output | 3,000 to 8,000 lm |
Mounting | Surface-mount plate with roof-mount PV panel |
Cable Length (panel to fixture) | 10 to 25 ft low-voltage DC |
Recommended Fixture | Solar Canopy Light |
CCT | 4000K / 5700K selectable |
Motion Sensor Option | PIR, 15 to 30 ft detection |
Autonomy Days | 3 to 4 nights |
Warranty | 5 years standard |
Every fixture generates its own power. No utility meter, no demand charges, no rate escalation over the fixture lifetime.
Off-grid fixtures eliminate underground conduit, electrical permits, and utility service drops. Install in days instead of weeks.
Pole, base plate, and fixture finish in a single crew day per unit. No utility coordination, no closure of active areas during daylight.
3,000+ deep-cycle charges, operation from -40 F to 140 F, and 10+ year service life across every SolarPath fixture.
From gas station fuel islands to retail drive-through lanes and parking deck retrofits, SolarPath Sun Solutions delivers canopy lighting purpose-engineered for under-canopy geometry and retrofit speed. Every project ships with a photometric study, a roof-mount panel installation plan, and a five-year warranty on every component.
Browse our solar canopy lights and full product catalog.
A separate PV panel mounts on the canopy roof and connects to the fixture underneath via a short low-voltage DC cable (10 to 25 feet). The cable runs along the canopy exterior without penetrating structural concrete. The LiFePO4 battery is integrated into the fixture housing.
Yes. Retrofit installation takes around 4 hours per fixture without closing the fuel island or drive-through lane. The surface-mount plate attaches to existing canopy deck, and the roof-mount panel installs with adhesive or surface anchors depending on canopy material.
Under 3 inches for all SolarPath canopy light SKUs. This fits standard gas station canopies (13.5 to 14.5 foot clearance) and retail drive-through canopies without protruding into vehicle traffic lanes.
Gas station fuel islands typically specify 5,000 to 8,000 lumens per fixture at 20 to 30 footcandles average maintained. Retail drive-through lanes use 3,000 to 5,000 lumens. Parking deck retrofits vary from 3,000 to 6,000 lumens depending on ceiling height.
Yes. Optional PIR motion sensors with 15 to 30 foot detection range are available on every canopy light SKU. Two-stage dimming extends autonomy on low-traffic drive-through and parking deck applications.
5700K daylight is the standard specification for gas station fuel islands and industrial canopy sites. 4000K neutral suits retail drive-through and parking deck applications where warmer rendering is preferred.
Standard five-year warranty covering the PV panel, LiFePO4 battery, MPPT controller, LED array, and connecting cable. Extended seven-year warranties are available for commercial fleet retrofit contracts.
Request a free solar lighting audit and discover how off-grid commercial lighting can reduce your operating costs to zero.
Or call 1-800-SOLAR-PATH
